{"id":2203,"date":"2015-03-25T11:17:11","date_gmt":"2015-03-25T11:17:11","guid":{"rendered":"http:\/\/orienteck.net\/?page_id=2203"},"modified":"2015-05-09T05:26:16","modified_gmt":"2015-05-09T05:26:16","slug":"epoxy-coverings","status":"publish","type":"page","link":"https:\/\/orienteck.net\/?page_id=2203","title":{"rendered":"Epoxy Coverings"},"content":{"rendered":"

Epoxy Coverings<\/h1>\n

Primers\"1\"<\/h2>\n

PRIMER (Solvent Based Epoxy Concrete Primer)<\/strong>
\nIt is a solvent-based concrete primer with two component and low viscosity. Permeating through the capillary spaces of the concrete surface, thus it makes sure that the concrete surface is liquid impermeable. It strengthens the concrete infrastructure and provides a suitable infrastructure for adhesion for dye and covering coats that will come on top of it.<\/p>\n

PRIMER WB (Water Based Epoxy Concrete Primer)<\/strong>
\nIt is water based concrete primer with two components and low viscosity. Permeating through the capillary spaces of the concrete surface, it makes sure that the concrete surface is liquid impermeable. It strengthens the concrete infrastructure and provides suitable infrastructure for adhesion for due and covering coats that will come on top of it.<\/p>\n

PRIMER CWB (Water Based Conductive Epoxy Primer)\"2\"<\/strong>
\nIt is water based concrete primer with two components that contains conductive black pigments. It is used as the primer covering of the conductive primer covering.<\/p>\n

SHOP PRIMER (Solvent Based Epoxy Metal Primer)<\/strong>
\nIt is a temporary epoxy workshop with two components for polyamide curing.<\/p>\n

ZC PRIMER & ST (Solvent Based Epoxy Zinc omate Metal Primer & Surface Tolerance)<\/strong>
\nIt is a general-purpose metal primer with two components and polyamide curing. It gives a perfect outcome on metal surface where surface cleaning cannot be done. It is anticorrosive.<\/p>\n

ZP PRIMER & ST (Solvent Based Epoxy Zinc Phosphate Metal Primer & Surface Tolerance)\"3\"<\/strong>
\nIt is an epoxy based metal primer with surface tolerance that is particularly useful at protecting the metal surfaces, which will stay under soil against corrosion.<\/p>\n

ZRP PRIMER & ST (Solvent Based Rich Zinc Epoxy Primer& Surface Tolerance)<\/strong>
\nIt is an epoxy based metal primer, which is cathodic anticorrosive. It is used particularly to protect the metal water and fuel pipes that stay under the soil against corrosion.<\/p>\n

UNDERCOATS<\/h2>\n

UNDERCOAT HB (Solvent Based Epoxy Undercoat)<\/strong>
\nIt is the undercoat paint before the topcoat dye application of any concrete, wooden, metal etc. surfaces. It is used as an adhesion coat between the primer and topcoat.<\/p>\n

SF PRIMER & ST (Solvent-free Epoxy Undercoat\/Primer & with Surface Tolerance)
\n<\/strong>
\nIt is an epoxy undercoat and primer, which is solvent-free, has a high filling and polyamine curing. It may be used for leveling purposes on metal and concrete surfaces.<\/p>\n

Primer WS (Solvent-free Concrete Primer)<\/strong>
\nIt contains two components and has polyamine curing, forming the concrete primer of Epoxy and Polyurethane floor covering systems. Not containing any solvent offers an easy application in indoor places.<\/p>\n

Epoxy Selflevelling & Screed (Special Heavy Duty Screeds and Coverings)<\/h2>\n

Epoxy SL (Epoxy Selflevelling Floor Covering)<\/strong>
\nIt is a covering system used especially as a heavy service floor covering system, that is seamless and with a high chemical and mechanical resistance. SL applied in 2 mm thickness as a standard could also be applied up to 3 mm thickness depending on the vehicle and people traffic that it will be exposed to. SL which is a high performance floor covering has also hygienic and antistatic qualities.<\/p>\n

Epoxy SL AR (Acid Resistant Epoxy Based Covering)<\/strong>
\nIt is a covering that could be applied up to 3 mm thickness and that has high resistance to acid. It is especially resistance on the floors where light\/medium people and vehicle traffic are present and high acid resistance is required. It is hygienic and antistatic.<\/p>\n

It is resistance to acetic acid, aluminum hydroxide, ammoniac, aromatic hydrocarbons, beer, gasoline, boric acid, omic acid, citric acid, oil acid, hydrofluoric acid 30%, lactic acid, nitric acid 30%, oxalic acid, phosphoric acid 45%, sulphuric acid 80% and many more acids. Ask for chemical
\nresistance table for more detailed information.<\/p>\n

Areas of Use:
\nMilk and dairy products, fruit juices, canned products, dessert products production facility, factories and other facilities where the acidic chemicals affect the floor<\/p>\n

Epoxy ML (Multilayer Epoxy Selflevelling)
\n<\/strong>
\nA covering system that may be applied up to 5 mm thickness that is seamless and especially has a very high mechanical resistance and chemical resistance. It is especially resistance to heavy vehicle traffic and production environments and it is hygienic and antistatic.<\/p>\n

Areas of use:<\/p>\n

Food production facilities, hospitals, meal production facilities, automotive industry, plastics manufacture sector, textile manufacture facilities, beer
\nand beer malt facilities, TV studios, plane hangars, laundries, electronic device production and assembly fields, water and juice filling facilities, print shops, vehicle repair and service shops, hypermarkets, shopping malls, department stores and similar facilities.<\/p>\n

General Physical Data:<\/p>\n

    \n
  • Linear Thermal Expansion: 18-30 \/\u00b0C<\/li>\n
  • Electrical Conductivity: ~ 10\u00b9\u00b2 \u03a9<\/li>\n
  • Heat Transmission Coefficient: ~ 0,3 kcal\/mh\u00b0C<\/li>\n
  • Wear Resistance: ~ 6 cm\u00b3\/50 cm\u00b2<\/li>\n
  • Tensile Strength: 37 N\/mm\u00b2<\/li>\n
  • Pressing Resistance: 72 N\/mm\u00b2<\/li>\n<\/ul>\n

    Epoxy SL WB (Water based Epoxy Floor Covering)\"8\"<\/strong>
    \nAn epoxy floor covering supported with polymeric emulsion, SL WB is a new technology product with a broad area of application.
    \nSL WB has high anticorrosive and rust resistance. It may even be applied and cured under less than 5\u00b0C of heat. When cured, it creates a floor with high heat, friction and impact resistance and an opaque, aesthetic look.
    \nAs this product has water vapor permeability, it does not cause any problem with application on humid floors. It provides the perfect outcome on floors with osmotic pressure problem.
    \nIt does not contain any volatile organic compounds such as gasoline, alcohol. Thanks to this feature, it is an environment-friendly system perfect at covering floors that contact with food and water.<\/p>\n

    Epoxy SL CWB (Water based Electrical Conductive Epoxy Floor Covering)
    \n<\/strong>
    \nIt is a system that is easily used and that gives high performance in operating rooms, computer rooms, electronic device production floors, television studios, radiology rooms, floors and places where the static electric is high and it affects the production negatively.
    \nIt may be produced in decorative colors and at the requested conductivity values.<\/p>\n

    Advantages;<\/span>
    \n\u2022 Monolithic and does not contain joint.
    \n\u2022 As it is a water based Epoxy system, it does not contain volatile organic component. It does not harm the health.
    \n\u2022 It may be applied under low temperatures including on humid and wet concrete floors.
    \n\u2022 High heat resistance.
    \n\u2022 It may be easily renewed economically at a very short time.
    \n\u2022 It has a very long life.
    \n\u2022 Resistant to light\/medium vehicle and people and it is not slippery.
    \n\u2022 Extremely easy to clean and it has high chemical resistance.
    \n\u2022 High wear resistance. Its UV resistance is high.
    \n\u2022 As its water vapor permeability is high, the covering does not leave the surface due to the humidity or water in the concrete infrastructure.
    \n\u2022 For technical details, please check the Product Specification Sheet.<\/p>\n

    Epoxy TX (Textured Epoxy Floor Covering)\"10\"<\/strong>
    \nIt is an epoxy-based floor covering that can be applied up to 1 mm thickness with an orange peel pattern. It is ideal for indoor parking lots, department stores, ramps, and office floors. It is hygienic and antistatic, and is an economical covering that can tolerate the surface errors.<\/p>\n

    Epoxy HB-80 (Straight Epoxy Floor Covering)<\/strong>
    \nIt is an economical and aesthetic covering for surfaces with smooth infrastructure that can be applied up to 1 mm thickness, which is seamless, has high chemical resistance, and is resistant to light people and vehicle traffic.<\/p>\n

    PVC Chip Epoxy (PVC Chip Epoxy Covering System)<\/strong>
    \nIt is a healthy system that is easy to clean for department stores, offices, wet floors, restaurants, studios, and kitchens, floors with decorative patterns and color combinations that are intended to be seamless.
    \nPVC Chip Epoxy coverings could be applied on each type of floors, being seamless systems; they may be used on any scaled floor thanks to its unique application. The system that can have textured or straight bright look has high mechanic and chemical resistance like the other epoxy systems.<\/p>\n

    Epoxy VARNISH (Transparent Epoxy)<\/strong>
    \nA transparent, solvent free system, this one is preferred in concept floor applications. It is used on the floors of places like department stores, offices, restaurants, bars and cafes.<\/p>\n

      \n
    • Heat Resistance Paints.<\/li>\n
    • High Heat Resistance Paints.<\/li>\n
    • HSP SERIES PRODUCTS (High Heat Resistant Silicon Based Topcoats).<\/li>\n
    • HSP 250\/400\/600\/750.It is a silicon resin based topcoat which is anticorrosive and has high heat resistance, used especially on the metal surfaces of exhaust, generator and furnaces that are exposed to high temperature.<\/li>\n<\/ul>\n

      EPOXY PUTTY & COMPUNDS\"13\"<\/h2>\n

      Epoxy COMPOUND ST (Standard Epoxy Paste)<\/strong>
      \nA two-component solventfree epoxy based paste is used in repairing any surface before dying and leveling the surfaces.<\/p>\n

      Epoxy COMPOUND SP (Epoxy Filling Paste)<\/strong>
      \nIt is a two-component, solvent-free epoxy based filling and leveling paste. It dries fast and due to its thixotropic composition, it does not flow on steep surfaces and it is a nonshrink material.<\/p>\n

      Epoxy COMPOUND FLEX (Flexible Epoxy Filling Paste)<\/strong>
      \nIt is a two-component, solvent-free epoxy based flexible filling and leveling paste. It is nonshrink and does not flow on steep surfaces at high thickness. It gives a perfect outcome as a joint filling.<\/p>\n

      Epoxy COMPOUND LD (Light Epoxy Filling and Leveling Paste)<\/strong>
      \nIt is a two-component, solvent-free epoxy based, lighter than water filling and leveling material. Since it is lighter than water, it is especially used on the surfaces of boats and ships for filling and leveling purposes, and also it is safely used to correct the surfaces where weight causes problems with filling and leveling.<\/p>\n

      Epoxy Enamels & Topcoats\"15\"<\/h2>\n

      Epoxy ENAMEL (Solvent Based Epoxy Enamel Paint)<\/strong>
      \nIt is a general-purpose epoxy topcoat with two components and solvent and that has polyamine adduct curing. It is used as a protective topcoat on metal and concrete surfaces against the atmospheric and chemical corrosion.<\/p>\n

      Epoxy ENAMEL WB (Water Based Epoxy Enamel Paint)<\/strong>
      \nIt is a general-purpose water-based anticorrosive topcoat that contains two components and that has modified Amin curing. As it is water-based, it does not contain any organic volatile compounds. It is environment-friendly.<\/p>\n

      Epoxy HB (Solvent-free Epoxy high Build Topcoat)<\/strong>
      \nSolvent-free with two components, it can be safely used on concrete, MDF, marble, wooden etc. surfaces. It is effective for atmospheric and chemical corrosion. Furthermore, it is dust free on straight factory floors where dust affects production and used as a hygienic economical floor covering material.<\/p>\n

      Epoxy HB AR (Acid Resistant Solventfree Epoxy Topcoat)<\/strong>
      \nA high build topcoat with two components that has polyamine curing and resistance to acidic environments. It may be applied on any metal, wooden and concrete surfaces. It may be safely used on industrial floors that require resistance to acid where there is light people and vehicle traffic.<\/p>\n

      PLK TOPCOAT\/AL (Polyurethane Aliphatic Topcoat)<\/strong>
      \nIt is a bright topcoat with two components that has isocyanate curing, and that contains solvent. It is a topcoat that is especially resistant to atmospheric conditions and UV, which may be applied on any surface.<\/p>\n

      COALTAR HB (Coal tarred Solvent-Containing Epoxy Based Topcoat)<\/strong>
      \nIt is a topcoat that has two components and polyaminoamid adduct curing tar. It may be used as anticorrosive topcoat on metal pipes or metal or concrete surfaces of the waste pools.<\/p>\n

      TAR (Solventfree Tarred Epoxy high Build Topcoat)<\/strong>
      \nIt is a topcoat with two components that has high Build polyamine adducts based chemical resistance. It is used on metal or concrete surfaces where the metal pipes and waste facilities are exposed to chemical effects.<\/p>\n","protected":false},"excerpt":{"rendered":"

      Epoxy Coverings Primers PRIMER (Solvent Based Epoxy Concrete Primer) It is a solvent-based concrete primer with two component and low viscosity. Permeating through the capillary spaces of the concrete surface, thus it makes sure that the concrete surface is liquid impermeable. It strengthens the concrete infrastructure and provides a suitable infrastructure for adhesion for dye […]<\/p>\n","protected":false},"author":1,"featured_media":2033,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"_links":{"self":[{"href":"https:\/\/orienteck.net\/index.php?rest_route=\/wp\/v2\/pages\/2203"}],"collection":[{"href":"https:\/\/orienteck.net\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/orienteck.net\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/orienteck.net\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/orienteck.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=2203"}],"version-history":[{"count":0,"href":"https:\/\/orienteck.net\/index.php?rest_route=\/wp\/v2\/pages\/2203\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/orienteck.net\/index.php?rest_route=\/wp\/v2\/media\/2033"}],"wp:attachment":[{"href":"https:\/\/orienteck.net\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=2203"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}